Tuesday, November 25, 2014

Recipe for Apple Fritters

I went to a gathering at a friend's house last weekend. It was a beautiful November night, full or stars and not too cold. Early in the evening, as guests were still arriving and gathering around the campfire, one of our friends, Honey Marie, was still in the kitchen, dancing to music and frying up fritters.

These fritters aren't as good as Honey's, but they're still pretty damn good! I fried them up last night when I woke up at 3am with a sweet tooth and noticed that I still had one apple left from the several that I had bought from Mary Ann's fruit stand a few days before.


Apple fritters frying in coconut oil

Served up with honey and molasses
  1. In a small mixing bowl, combine 1/2 cup oatmeal, 1/4 cup wheat flour, 1/4 cup nut or soy flour, 1/4 cup biscuit mix, 1/2 cup sugar, and lots of cinnamon
  2. Mix in one egg, 1/4 cup olive oil, and just enough water to bring to a thick batter
  3. Add one peeled and diced apple
Mix batter well. Heat 1/4 inch of coconut oil to medium-high heat in a small frying pan. Drop spoonfuls of batter mix into hot oil and fry to golden brown, flipping as needed. Remove from frying pan and place on paper towel to remove excess oil. Top with honey and molasses when served.

Enjoy!

Wednesday, November 19, 2014

Bringing Electricity into my World

It's mid-November now. Thanksgiving is next week, and December is right around the corner. Soon it will be Christmas, then New Year's Eve when I will drink a toast to 2015, the start of a new chapter in my life, for I'm retiring from the software industry at the end of this year.

Retirement will bring big changes to my life, so it's a very interesting time for me. I've been doing a lot of thinking these past few months about what next year may bring, and over the weekend I made some final decisions that will impact my life in the tent, the most important of which is the concession that...

I'm gonna need electricity.

Yep, that's right, I have to bring in electricity. I'm actually okay with this decision, finally, but I must admit that I didn't like going down that road to begin with. Electricity is just too...tempting. Once I have an AC outlet in my tent, I'll be tempted by other things, like televisions and DVD players and...God, help me! So I'm about to begin my battle with worldly temptations again, and I hope I have the strength to persevere.

In any case, for better or for worse, I've decided to flirt with that temptress in order to pursue my passions next year. I plan to write and make music for hours at a time, so I'm gonna need to plug-in.

I'll use a laptop for writing. I'm still shopping for one, but it will be very basic. Just a small system with Internet capabilities. Small, cheap, and low power consumption. For music, I plan to do a lot of recording and to rehearse once in a while for live performances. I already own an eight-track digital recorder, and a small acoustic amplifier for live performances.

I plan to build a 12V system with a single AC inverter. To correctly size the components, I need to look closely at my consumption.

First, I need to determine the peak load by adding up the wattage of all devices that could be running at the same time. This sum will determine the inverter size that I'll need.

The devices that I'll be operating are:
  • Laptop = 100W
  • Digital recorder = 20W
  • Small acoustic amplifier = 150W
I might actually want to operate all of these at the same time. For example, I might want to mic the amplifier and record the output, then download the recorded tracks to the laptop. So my peak load could be as high as 100 + 20 + 150 = 270W. I'll round that up to a 400W inverter which I can easily find for under $30.00.

Next, I need to find my average daily consumption by multiplying the wattage of each device by its average run-time. That will give me my average watt-hours per day. But what will my "average day" look like? Hmm. Well, some days I may write all day long, so a day of writing would cost me 100W x 8 hours = 800 watt-hours. Other days, I might be recording all day long, so 20W x 8 hours = 160 watt-hours. I don't plan to do much rehearsing through the amplifier, so maybe a few hours here and there would be a big day for that, something like 150W x 2 hours = 300 watt-hours per week at the most.

Ok, that helps, but it still doesn't give me a good sense of what an "average day" might be like, so let's explore that. The writing days are the heavy consumers, but if I'm really writing all day long, then I'll probably want to get out anyway, maybe go to a coffee shop and socialize a bit and get on the Internet. So I'll just budget for one day of at-home writing per week. Now, for the digital recording. My recording time will probably go in spurts. I might record for a few days in a row, then take an entire week off. So on average, I'll budget for two full days of recording per week. So that gives me: (800 x 1 day) + (160 x 2 days) = 1120 watt-hours per week. I'll round that up to 1300 watt-hours per week.

Now that I know my average consumption, I can start to think about how many days I'd like to run before having to recharge. At the moment, I plan to recharge my batteries at a local auto parts store (I'm still looking into that, so I'll have another post on recharging later). I don't mind taking batteries in once a week for recharge, but I'd like at least five full days of continuous operation on a single charge. And I don't want to draw the batteries down below 50% depth of discharge, so I'll double the weekly consumption rate to 2600 watt-hours and size the batteries based on that figure.

For a 12V system, I'll need 2600 watt-hours / 12V = 217 amp-hours per week. I can get that from just one battery, albeit a pretty expensive one (something like the Trojan J185H-AC 12V 225AH flooded deep-cycle battery, which costs over $300.00!). Or I could build a battery bank from 12V or 6V batteries.

So the problem now comes down to acquiring the batteries and figuring out how to recharge them. I'll need to do more research to figure that out, so stay tuned!

Thursday, November 6, 2014

New Propane Heater

I'm still experimenting with different space heaters to heat my tent in Autumn. The wood stove is just too hot to fire up until December, so I need a space heater to get me through October and November.

My first two Winters, I used a kerosene space heater. Kerosene heat is very economical and puts out about 22K BTUs, which is more than enough for my needs. But while kerosene heat has some nice advantages, I just didn't like the mess and the fumes, so last year I switched to propane. I chose a Mr. Heater MH15T tank-top heater, which puts out about 15K BTUs. The tank-top heater was also very economical, provided plenty of heat, was very convenient, and gave off no fumes. But the tank-top heater was a bit difficult to connect to the tank, and I just didn't like the design, from a safety standpoint. It had an automatic shut-off in case it tipped over, but I still didn't like the higher center of gravity on the tank, and the idea that the heater was physically connected to the tank. Also, the wiring from the thermocouple to the shut-off valve was just sort of hanging off to the side where it could be easily damaged. In fact, the thermocouple failed last Spring, but whether that was due to the wiring or to something else I don't know.

A few weeks ago, I went shopping for a new propane heater to replace the old tank-top that broke last Spring. I had been pretty pleased with the tank-top heater, and fully intended to just buy another one, until I saw the Mr. Heater MH9BX Portable Buddy propane heater.

Mr. Heater MH9BX Portable Buddy
The Portable Buddy had a lot of features that I really liked. It was a separate unit that attached to the propane tank with an adaptor hose, which meant that I could keep the tank outside of the tent if I wanted. It also had an electric ignitor, which wasn't available on the tank-top heater. It had an automatic shut-off in case of tip, like the tank-top model, but it also had a shut-off in case of low oxygen. And it was much easier to move around than the tank-top model. The Portable Buddy also had a more refined radiant panel, which provided a much quieter burn.

On the down-side, the Portable Buddy is nearly twice the price of the tank-top model, and it only offers 9K BTUs. That's only enough heat to raise the temperature in my tent by 20 degrees or so (compared to 30 degrees with the 15K BTU tank-top model). With only a 20 degree increase, the 9K BTUs will only get me into the low-60s on those cold November mornings in Virginia.

After scratching my head a bit, I decided to go ahead and try the Portable Buddy. I also purchased a 5' adaptor hose and decided to just leave the tank inside the tent for now (probably a mistake!) I've only used the heater a few times so far, but I like it a lot.The heater is nearly silent when it burns, and has a beautify orange glow that lights up my dark tent in the early morning. As the days get colder, I'll probably have to supplement the heater by burning my propane cook stove, too, which I occasionally do anyway. But the lower BTUs is more than compensated for by the improved safety over the tank-top model, which is a big advantage for me.

Tuesday, November 4, 2014

Reflections on Election Night

It's Election Night 2014, and millions of my fellow American citizens are voting. I won't be joining them. I don't vote anymore.

I know that it's my duty to vote. And I know that we are blessed in this country to have the opportunity to vote. That democracy only works when the citizens speak their will at the polls. I still believe in democracy, that it's the best form of government that man has so far devised, and perhaps ever will devise. But lately, the very idea of voting in America turns my stomach.

The US Federal Government is an abomination. It is a vile and shameful thing, and I detest it. It epitomises the very worst in human nature. Greed. Power. Ego. Injustice. Deceit. And I will not be a part of it any longer.

I don't complain about how thing are going in this country anymore, either, for I know that this ship is on its own course now, the captain and crew having some time ago left their positions in order to meet with lobbyists and capitalists and other powerful and influential people. And although the multitude of passengers sense that something is amiss because the vessel is listing so badly, the officers on board remain confident that between them all, they will always remain in control, each taking their turn as captain or commander or lieutenant or midshipman with each passing election. And so it is tonight, when the passengers are allowed to cast their votes, and the crew is obliged to switch their hats and uniforms in accordance before returning to their politics. But the ship! Is anybody tending to the ship!

I will always obey the laws of this land, and respect the authority of it's appointed agents, and do my best to be a good citizen in other ways. But I will not sanction this abhorrent government by casting even one single vote in the affirmative, for I strongly disagree with it all. I loathe it's very nature now, and I cannot find even a remnant of anything holy or righteous anywhere in it.

This government only affects me in as much as I let it, so I don't let it. This government is dead to me now, so no, I won't be voting. But to my fellow citizens who still believe in such things: Here's to your candidate winning the election and fixing things up! Good luck! In the meantime, I'll be in my cabin, enjoying what's left of the cruise (and perhaps fashioning a life boat).